Results 1 to 6 of 6

Thread: Ford CAN BUS PIDs

  1. #1
    Potential Tuner
    Join Date
    Jan 2008
    Posts
    1

    Ford CAN BUS PIDs

    I am a Senior at Penn State and I have been assigned a senior project that requires me to build a tool that can read from the CAN bus of a Ford. Unfortunately, I am unable to find Ford's CAN PIDs anywhere! I have tried contacting them, but they weren't helpful. My graduation hinges on my obtaining these codes. The specific codes I will need are the codes for the MAF sensor and MAP sensor. Any other codes would be neat to have, as well, but the MAF and MAP are the only ones that are vital to the completion of my project.

    Any help would be GREATLY appreciated!!!

    Thanks,
    Ben

    P.S. Are Ford's CAN PIDs uniform for all models, or are there different codes for every model? I plan on testing my final product on a Rent-A-Car, so if the PIDs are model-specific please I will need to know what model and year they are for.

  2. #2
    the standard SAE pids should cover what you need:

    http://en.wikipedia.org/wiki/OBD-II_PIDs

    Chris...
    I count sheep in hex...

  3. #3
    Potential Tuner
    Join Date
    Jun 2008
    Posts
    2

    Cool

    hi
    i make tunning for camaro 2002
    when air\fuel is ok comming knocking sound why ????????
    timing hight octen ok

  4. #4
    Potential Tuner
    Join Date
    Jun 2008
    Posts
    2
    Quote Originally Posted by veetdoc
    hi
    i make tunning for camaro 2002
    when air\fuel is ok comming knocking sound why ????????
    timing hight octen ok

  5. #5
    Tuner wadelieck's Avatar
    Join Date
    Jun 2008
    Location
    San Antonio
    Posts
    133
    your asking in the wrong sec
    Precision Racing in San Antonio.

    New shop better people, attitude, and TUNING...


  6. #6
    Potential Tuner
    Join Date
    Nov 2009
    Posts
    1
    could try this, it ahs the can codes for the map etc for use with a scangauge "http://scangauge.com/support/pdfs/XGAUGE.pdf."