Page 2 of 2 FirstFirst 12
Results 21 to 23 of 23

Thread: 99 vette ls6 cold start idle and tuning HELP

  1. #21
    Tuner
    Join Date
    Feb 2007
    Location
    Jacksonville Fl
    Posts
    65

    Unhappy

    this vehicle has bbk 80mm intake and throttle body has anyone had problems with i have vacuum leak i think is plate at bottom of intake

  2. #22
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,214
    A vacuum leak is not causing the negative fuel trims. Your tune is way too rich.The even numbered rows of the sec VE table has to match the even numbered rows of the primary VE table. And your primary VE table is a real mess. You need a wideband to tune the VE table.

    If I was tuning your car, I would enable the Maf & return the VE tables back to stock. A Maf table can be easily tuned using fuel trims to get the part throttle close until you get a wideband.

    Russ Kemp

  3. #23
    Tuner
    Join Date
    Feb 2007
    Location
    Jacksonville Fl
    Posts
    65
    thanks russ how would i do the maf tune and i will put ve tables back to stock for now and get windband ordered