I have a AutoMeter wide band sensor that has a 0-4 volt output with programable miniumum (0 volts) and maximum (4 volts). I assume that I can program the min for 10 afr and the max for 18 afr (Or any range as long as I program the right range in HPT) and it will work OK in HPT's VCMI even though it takes 0-5 volt inputs?
2005 VR, Z-51, Six Speed, Procharger D1 @ 8psi, piller mount vacuum/boost/wide band gages, LPE hood, Z06 Rear fenders, 160 deg T/S, LG Motorsport headers w/cats & X-Pipe, Chrome Z06 Wheels, Z06 Brake Upgrade w/ SS lines, Full VR GM Spoiler, KP BAP w/Racetronix wiring harness, DPE Procharger 2 minute oil drain kit, Michelin Runflat Pilot Sport 345/30/19 Rear, 275/35/18 front, Halltech CAI, Tuned and Dyno'd at 521 rwhp 489 rwt by LG Motorsports
I post almost the same question here
http://www.hptuners.com/forum/showthread.php?t=14570
Reply With Quote