Results 1 to 12 of 12

Thread: Losing v4 mode with 08 5.3 avalanche

  1. #1
    Tuner in Training
    Join Date
    Mar 2006
    Posts
    25

    Losing v4 mode with 08 5.3 avalanche

    After flashing with a new calibration, v4 mode (DOD) is disabled. I have checked the "switches" to ensure it's still enabled in hpt. Any ideas?

  2. #2
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,214
    I found that the DoD is disabled when the COT is disabled. Just enable the COT, but change the max enrichment to 1.13.

    Russ Kemp

  3. #3
    Tuner in Training
    Join Date
    Mar 2006
    Posts
    25
    thanks

  4. #4
    Advanced Tuner
    Join Date
    Jun 2006
    Posts
    384
    AHA! This is what I needed maybe. Ive been wanting to 'play' with DOD even though I have a 2006 GTO. I want to try it in open loop mode, see if the fuel cuts off. I am interested in acquiring the parts and retrofitting it, but only if I can make it kick on to begin with

    ...and it wasnt. ...and I'm sure its because i have COT disabled.

  5. #5
    Advanced Tuner
    Join Date
    May 2007
    Posts
    307
    i wonder why GM hasnt included the DoD on all of their vehicles. it is an AWESOME feature, and who wouldnt love to get an additional 5+mpg!!!!

  6. #6
    Advanced Tuner
    Join Date
    Jun 2006
    Posts
    384
    I think there are rev issues with cams on performance vehicles, for example, as well as cost. I think eventually they will put it in more cars as they HAVE to to meet EPA's MPG requirements.

    They have it in a V6 now, the new Malibu. Weird. How do they keep the engine in balance? ? ?

  7. #7
    Senior Tuner
    Join Date
    Jun 2007
    Posts
    1,100
    Quote Originally Posted by Texsrt4
    i wonder why GM hasnt included the DoD on all of their vehicles. it is an AWESOME feature, and who wouldnt love to get an additional 5+mpg!!!!

    I would love to have it.

    I have even contemplated what it would take to add the feature to my LS2, damn TBSS is a gas hog that only gets 12-15 MPG on average.

  8. #8
    Advanced Tuner
    Join Date
    Jun 2006
    Posts
    384
    Drove around yesterday with COT and DOD enabled (despite lacking the associated hardware) but it never turned on the "DOD Requested" bit, and never cut fuel.

    I think its hard-coded not to work?

  9. #9
    Супер Модератор EC_Tune's Avatar
    Join Date
    Apr 2003
    Location
    Almost 2000 feet.
    Posts
    7,876
    Probably other settings not being revealed.
    Always Support Our Troops!

  10. #10
    Tuner
    Join Date
    Nov 2007
    Location
    Frankenmuth, MI
    Posts
    104
    Quote Originally Posted by LazMan
    Drove around yesterday with COT and DOD enabled (despite lacking the associated hardware) but it never turned on the "DOD Requested" bit, and never cut fuel.

    I think its hard-coded not to work?
    Any ideas why the DOD quite working after a flash?
    Is that normal?
    Real Question: Can you tune a '07 Av 5.3 and still have DOD work?
    07 Avalanche Exhaust & CAI

  11. #11
    Advanced Tuner
    Join Date
    Jun 2006
    Posts
    384
    Make sure you do not have Cat. Over Temperature (COT) disabled. Change it to Enabled.

    Disabling this on some tunes causes DOD to stop working as well. It seems Cat OverTemp is the "Master Enable" for everything else on that "page" ... i.e. for both COT and DOD.

    Answer to your real question: yes.

  12. #12
    Tuner
    Join Date
    Nov 2007
    Location
    Frankenmuth, MI
    Posts
    104
    Quote Originally Posted by LazMan
    Answer to your real question: yes.
    Thank you!
    07 Avalanche Exhaust & CAI