AEM EUGO Gauge Logging

[MotleyDrew]

Hey guys

I found in the help file how to add the PID for logging the AEM gauge within HPTuners but just want to make sure the physical setup is correct.

From the AEM gauge you just have one .5v line. Do you just plug this into one of the 4 inputs in the MVPI Pro or do you need to add a ground as well?

let me know

thanks

[MotleyDrew]

anyone????

[EC_Tune]

If the AEM has a sensor output and a signal return line (sensor ground, not power ground) then run the sensor out to Pin 1 and sensor return to Pin 5.

[MotleyDrew]

great thanks !