What can I Do?? with hp tuner

[ezyride]

I trying to tune my 2001 3800 Turbo using HP Suite 2.2.0 with 60lb injectors and a LT1 SLP MAF.

I Feel like im going in circles heading nowhere with this software..

I can't access RTT in editor or scanner.. I can't setup my injectors or setup my maf in O/S.. (etc.. my engine general tab shows me only EGR Min IAT help tells me i could setup RTT)

Do this software only have all the feature for GM V8's because it shows me all the features i need in the help menu but doesn't work with my PCM..

Can some help me??

[Bill@HPTuners]

Try looking at other tabs other than just Engine-General

Try
Engine-Airflow
Engine-Fuel control
Engine-Spark Control
etc.

the OS tab is for vehicles that have custom operating systems which the 3800 pcm does not have available.

[ezyride]

i what to be able to change setting in Real Time tuning.. it there a way to have it stay connected

It keeps going offline after i load the PCM

[Bill@HPTuners]

Bi-directional controls.

www.hptuners.com/help is a great place to start as well as the stickies in the getting started section

[ezyride]

sorry bill.. what does bi-directional controls mean??

[Bill@HPTuners]

The help file link I posted explains everything.

[Bill@HPTuners]

http://www.hptuners.com/help/vcm_sca...cmcontrols.htm

[ezyride]

Ive looked at the help file.. It tells me to set up RTT in the Engine-General Tab.. I don't have this feature

And on the scanner after connected look for the wrench icon tab but my doesn't show.. is there anyother way to connect RTT??

I Guess my question is can you tune on the fly with a 3800 PCM?

[ezyride]

how is this link gonna help me.. I want to be able to do REAL TIME TUNING, i have read all the help tabs, it tells me how to do it, but my software doesnt allow me to do it, probably cause its a V6? i dont know, is it possible to do real time tuning with the V6 software?? if so how?, that is what i'm looking for, any help would be awesome thank you

[Bill@HPTuners]

Ive looked at the help file.. It tells me to set up RTT in the Engine-General Tab.. I don't have this feature

And on the scanner after connected look for the wrench icon tab but my doesn't show.. is there anyother way to connect RTT??

I Guess my question is can you tune on the fly with a 3800 PCM?

I don't know who told you RTT or Custom operating systems that support RTT was available on your pcm but it wasn't on this forum.

http://www.hptuners.com/products/vcmsuite_enhance.php RTT is ONLY available on Gen 3 99+ LS1 pcm's.

[Bill@HPTuners]

how is this link gonna help me.. I want to be able to do REAL TIME TUNING, i have read all the help tabs, it tells me how to do it, but my software doesnt allow me to do it, probably cause its a V6? i dont know, is it possible to do real time tuning with the V6 software?? if so how?, that is what i'm looking for, any help would be awesome thank you

What do you think bidirectional(vcm) controls do? They set things like air fuel ratio & timing to a set number in real time. Try them out as they work very well and I've used them often on my 00' GTP.

[Bill@HPTuners]

BTW if your not sure how to use them I had created a demo not too long ago showing exactly how to use them

http://www.thetuningdoctor.com/HPTun...20Controls.swf

as well as all of our demos

http://www.hptuners.com/forum/showthread.php?t=5058

This information is available to anyone that wants it but YOU need to click the button