Wiring up Wideband to HP Tuner

[bolo7735]

I have 04 Yukon 6.0L STS kit. I have the Autometer Wideband and would like to have it hook up to HP Tuner Pro. Do you have diagham or help page that can show me how to do it? Thank you for your time.

Richard

[EC_Tune]

Find the analog output of the wideband and hook it to Pin 1 of the MPVI as shown in the Help file (F1) the signal ground (not power ground) should go to Pin 5 of the MPVI.

Then use this custom PID:
Attachment 8947

[bolo7735]

Find the analog output of the wideband and hook it to Pin 1 of the MPVI as shown in the Help file (F1) the signal ground (not power ground) should go to Pin 5 of the MPVI.

Then use this custom PID:
Attachment 8947

Thank you for your help. Im new at the tuning and there is so much information on the forum it gets overwhelming.

Richard