Originally Posted by
Nitrous
Here's what I have that was confirmed by Z06Hater back in January. I spent some time with Fuel Air Spark Technologies today to make sure things were correct since there were still questions. Thanks for your time Ron and Hadley!
I verified the readings are the same today and they can be added to the custom PID's now. What do you think support?
Your max voltage is 4.096 and your sweep is from 9.6 - 21.0 with that being said the correct offset would be .359
4.096/ 11.4 = .359
.359(11.4) = 4.096 and so on and so forth.
I've added all 3 modes below so the F.A.S.T. unit can be versatilely used.
High Res Mode
Volts = .3597 + =9.6
Alcohol Mode
volts = .8196 + =4.096
Simple Mode
Volts = .1 + =0
All 3 modes can be used in single, dual or averaged modes.
Good Luck and enjoy your F.A.S.T AFR wideband!
Lance