I recently came across your site in an effort to find a product that would tune pretty much all domestics, as I am looking to expand from just tuning subarus, evos, hondas and a few other imports, to a much larger variety. I noticed that there were posts on up coming dodge/ford support and I was curious to see if there was a release time frame established.
yeah after e16a for GMs... haha haha haha *cough* heh.
The '07 Aura XR
[In] XM ExpressEZ
[Next] intake res delete, Tint, Eibachs
The Procharged Ion - SMP Stage 2 QC
20/5 tint, SPS stb, CF dash, reflective bumper insert, 62mm TB, RL plugs, masked corners, progress rsb, RL fsb, 2.5" cat-back, triple pod w/ Boost, FPG, LC-1 & XD-16, filled front & rear mounts, pclear shorty shift, Procharged, Eibach Pros, 8k HIDs - 188.28whp / 175.03wtq, NO TUNE
Ford support will be released publicly over the next couple of weeks with dodge to follow.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Do you have any idea exactly what Ford's we will be able to do?
2006 Ford F250 CCSB 6.0 Powerstroke
SCT Tuned by Vivian @ QuickTricksAutomotive
nice... I got a few waiting to be tuned in my area
2006 cobalt (no more turbo)
m62 2.7 pulley, E85, 79lb/hr injectors, 4-2-1 longtube header, airbox mod, stock catback
1998 Trans am 5.3 iron block 317 heads 88mm turbo e85 105lb/hr injectors, twin 255's.... build in progress
2014 wrx mild tune 18psi pump gas
Whatever the most popular models were people sent us over the last 3 months of beta testingOriginally Posted by justin99
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
sounds great...look forward to buying the professional suite
What about 96+ Mustangs or Cobras? I can get you a log or w/e you need if the last version can pull it from the car's computer. I've been waiting for this for over a year, i'm anxious!
Please say yes,
Philip K.
1997 Rio Red Cobra: 2700 of 6961
Tri-Ax | BBK O/R H | WMS Intake | Steeda UD Pullies | T56 6 Speed |03/04 Cobra Al Driveshaft | DD 11" SHD Clutch Kit | Fidanza Flywheel | SS inserts | Phantom Gauges | Innovative LC-1 | Venom VCN 1000 N2O 100 shot | Walbro 255 | Detroit TruTrac | Moser 31 Spline | Motive Lightened 4.56 gears | BBS RGR DB 18 x 8.5 , 18 x 9.5 |
271rwhp 265 tq 11.7 A/F
376rwhp 451 tq 100 shot. No Tuning.
Theres no timeframe for the older EEC stuff right now
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Hey Bill,
Will the diesel for ford & dodge be apart of the release also?
2006 LBZ Duramax 4x4 CC SB 2500HD SRW 4x4 LT1 (with extras), Blocked & Fingered, Fumoto drain valve, Keystone Ram Air Good Hood, Banks Ram Air, Access cover & Rhino over the rails, Victory Red.
33'-0" Dutchman fifthwheel,Tekonsha Voyager Brake Controller
Banks Sixgun with HPTUNERS.
One thing at a time
But yes we have plans for alot of things!
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Whatever the most popular models were people sent us over the last 3 months of beta testing
Can you tell me the chances of 00-current 4.6 crown vic?
Thanks,
1982 GMC S15 5.3 4L80e
1954 Corvette ls swap in progress
If the pcm's are interchangable with the vehicles listed here http://www.hptuners.com/forum/showthread.php?t=11304 then we could probably get them supported. I will say I have yet to see 1 crown vic vcm suite infolog or file come my way.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I don't have the MPVI interface, so I guess I need to upgrade.
1982 GMC S15 5.3 4L80e
1954 Corvette ls swap in progress
Any update on the progress for the Dodge ECU's, the one i'm most concerned about atl east right now is the SRT-4 however.
Right now we're concentrating on finalizing the Ford Beta...one thing at a time.
-Bill
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Reply With Quote
