Yeah you need to control rpm & iac for the cylinder balance to highlight I believe, the procedure is in the help file I believe.
Glad to hear CASE LEARN WORKS lol.
Yeah you need to control rpm & iac for the cylinder balance to highlight I believe, the procedure is in the help file I believe.
Glad to hear CASE LEARN WORKS lol.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Janky Monkey Tuning
Call or PM for tuning solutions.
Cell 210-954-4985
Wrench turning provided by 2 Tightwads Racing.
Tune your own? Start here ----> Open Editor ---> Hit F1...READ!
READ SOME MORE (Thank username 69Lt1bird): http://ls1tuningguide.com/
Still lost? Consult a Pro!
www.thetuningschool.com
www.calibratedsuccess.com
www.tunedbyfrost.com
This code came up on mine. I accidently installed the 2008 TBSS map and it popped on. I then installed the right 2007 TBSS map but it would not clear. I will give the steps a shot tomorrow. Thanks for posting the fix.
yess you help me too
ok i got it... had to start click relearn button then rev right away and it worked...
using 3.0
Ill try to clear this up for those having trouble...
set park brake,
push and hold brake until you are completely done,start vehicle,
click ( crank learn) fairly quickly accelerate till you hit the cut off, let off throttle once it has come to an idle IF successful your mil will go off,
click the OK button that told you to accell to cutoff,
turn off ignition for atleast 15 second. restart and the mil should stay off
you can now release the brake.. ( i also had to go into the diagnostic menu and clear the code from there on VCM Scanner but after that it should be fully reset.)
Last edited by wade stegal; 02-06-2016 at 02:03 PM.