LM-1 meter took a crap-was older unit so time to update.
Ok, so I get a new LC1 and Exactly set it up per Scott's how to-
Wideband O2's / Offset Voltages / How to
advanced set to 1/6
Check offset voltage -OK
Set back to formula-.625x10.0
Disconect and start up and AFR is reading 1/2 of what is commanded-7.3's
engine off and key on reads 14.6
Will try a free air set up again tomorrow and reset LC1 calib from software
WTF
update-fixed it