Wasn't able to find the information i was looking for if there were any correction tables to advance the timing for normal cruising, or only way is just the timing table. Wasn't sure if there was a way since my egr is deleted and if you have to adjust the mbt also. I just was looking at some logs to adjust my idle since i was quite rich first 10 secs after start and noticed cruising i am only at about 31 degrees with no adders. I am around the .40 airmass and about 2k rpm cruising at 70mph. figured i should be in the mid 40s for timing with low load. I do have the lean/cruise table and but its disabled. Its kind of my everyday driver that i play in also. So what trying to get it a little more efficient when just driving it around normally. Thanks