I have 03 silverado 1500 4wd supercharger stage 3 cam e85 .my ? Is how to tune b4 break in procedure since I'm going from 5.3 to 5.7 every thing else is same on new engine jst bigger what do I change so I don't glaze my cylinders?
I have 03 silverado 1500 4wd supercharger stage 3 cam e85 .my ? Is how to tune b4 break in procedure since I'm going from 5.3 to 5.7 every thing else is same on new engine jst bigger what do I change so I don't glaze my cylinders?
If the hone job was done correctly the rings should seat almost instantly. Definitely within the first 15-20 minutes of operation.
On new engines, I prime the oil system then once they start I'll keep them up off idle for a few minutes. Until the valve train quiets down. Then a quick check for leaks, make sure the temp stabilizes and there's no air in the cooling system, then beat it like a bad kid.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
Hell yea .I got the engine from summit with forged everything. Got the melling high flow oil pump as well and jst ordered amsoil 30 break in oil my lifters are only 1500 miles on them so should be good .thanks guys any do I add for fuel to my ve b4 first start since it's bored?