Ok so Im running the stock 5.7 ECU and have swapped in a 6.4 with MMX Max Effort Cam 3200 stall & 8 speed.
ISSUE: Start truck and after it warms up when I come to a stop it will die 3x's out of 10 I'd say. I have major issues with going from a stop reversing put in drive give it little throttle and it dies. Some what
difficult to start and get to idle without giving some throttle. Pretty difficult to get moving in traffic when this happens. Looking for some advice so that I may know what to fix. I tuned it myself and have it
running pretty good but cant get this gremlin off my back...
I have tried adjusting the tune as HemiTuna suggest and reduced the throttle airflow tables by quite a bit with no luck. Anyone mind looking at my tune to see if Im missing something.