I have a 2019 Chevy Silverado that I put a new dod delete kit in. The ECM (E90) has been unlocked by HP tuners and 8 credits downloaded. I have the HP BETA suite and I am able to make changes to the ECM. When I try to turn off the DOD it is not where it would be like on a 2017 or earlier, which was under engine / fuel / Fuel saving - lean. Does any one know how to turn this off on the newer E90 ECM's? Any help or tips would be appreciated. Thanks.
I think it's under camshaft. Lower the rpm setting to 0. If still using a variable cam leave as sliding, otherwise fix that too.
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
Reply With Quote