Results 1 to 5 of 5

Thread: 2020 Sierra L84 to L87 engine

  1. #1
    Tuner in Training
    Join Date
    May 2006
    Location
    K.S.A
    Posts
    46

    2020 Sierra L84 to L87 engine

    hello

    I have 2020 sierra L84 5.3L to L87 6.2L complete engine swap it had already ecm unlock

    can I swap files with the same OS to the L87 file or should done manually?

  2. #2
    Tuner in Training
    Join Date
    May 2006
    Location
    K.S.A
    Posts
    46
    Any advice guys?

  3. #3
    Senior Tuner TheMechanic's Avatar
    Join Date
    Jan 2014
    Location
    SoCal
    Posts
    1,562
    Seems like a reasonable swap. First check is if they use the same injector. If not you will need to find a like stock tune to transfer over the injector data. Next would be a decent compare of differences between the two other than just the displacement difference.

  4. #4
    Tuner in Training
    Join Date
    May 2006
    Location
    K.S.A
    Posts
    46
    Thank for sharing

    I do compare as normal and change some parameters truck runs as it should be

    But what I'm interested in is to write originally 6.2 file with the same operating system Number without any changes.

  5. #5
    Advanced Tuner
    Join Date
    Aug 2006
    Location
    Arizona
    Posts
    244
    Segment swaps are the way to go, this way even VT and VVE gets easily emulated
    2009.5 PBM G8 GXP M6 W/Roof-Self tune, OBX LTs, Kooks axleback, LSA blower, cam,
    Monster LT1-SC clutch, flex fuel, 12 psi [email protected] 1,800 D.A
    2007 TBSS-Self tune, bolt ons [email protected], 1,900 D.A
    1991 GMC Syclone- Self tune/catback 12.8@104, 4,200ft D.A