Results 1 to 4 of 4

Thread: 2001 Cobra no LTFT

  1. #1
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18

    2001 Cobra no LTFT

    I am having an issue with getting the car to use LTFTs. This has been going on for about a month. I flashed it yesterday and all worked as it should and since all seemed to work as advertised, I made a minor change, flashed the car and they were not working again. I went back to the previous working tune with no success. I drove the car for about a hour with a lot of highway use so there was ample time for it to repopulate. Has anyone ever had this issue before? The O2 sensor are new Bosch units.
    Attached Files Attached Files
    Last edited by SPFord; 4 Weeks Ago at 11:24 AM.

  2. #2
    Advanced Tuner
    Join Date
    Mar 2010
    Location
    New Orleans, LA
    Posts
    630
    If your fuel is dialed in then kams will remain at 1.

    post the tune file and someone can check it out to make sure you don't have kams disabled.
    decipha @ EFIDynoTuning
    http://www.efidynotuning.com/

  3. #3
    Tuner in Training
    Join Date
    Aug 2021
    Location
    North Eastern NC
    Posts
    18
    Quote Originally Posted by decipha View Post
    If your fuel is dialed in then kams will remain at 1.

    post the tune file and someone can check it out to make sure you don't have kams disabled.
    They are close, but not that close. when they were working I was getting a LTFT at cruise of +/- 1.2% and more at various loads. Updated original post with tune file.
    Last edited by SPFord; 4 Weeks Ago at 08:27 AM.

  4. #4
    Advanced Tuner
    Join Date
    Mar 2010
    Location
    New Orleans, LA
    Posts
    630
    All looks well.

    The stock tune only allows kams to update between .15 and .45 load. You can set the adaptive update rate table to all positive values to get it to adapt through out the range if you want.
    decipha @ EFIDynoTuning
    http://www.efidynotuning.com/