Results 1 to 3 of 3

Thread: question about stft

  1. #1

    question about stft

    my car is a 2014 chevy ss (holden) ls3 with 2 in headers btr stage 2 and a roto fab. exhaust is catless ive been in open loop for the last 2 years but i recently put the o2 sensors back in and put into closed loop just to see how far off i am and although my bank 1 is pretty close my bank 2 stays about 5 percent richer than bank 1. is this normal?

  2. #2
    Advanced Tuner Cringer's Avatar
    Join Date
    Aug 2021
    Location
    Somewhere smoothing your VVE table
    Posts
    513
    Quote Originally Posted by biholliday View Post
    my car is a 2014 chevy ss (holden) ls3 with 2 in headers btr stage 2 and a roto fab. exhaust is catless ive been in open loop for the last 2 years but i recently put the o2 sensors back in and put into closed loop just to see how far off i am and although my bank 1 is pretty close my bank 2 stays about 5 percent richer than bank 1. is this normal?
    I too have a '14 Chevy SS (Holden). Passenger side (B2) is always about 5% richer. It has done this with different sets of heads, intake manifolds, fuel injectors, replaced O2 sensors/swapped them side to side, and plugs/wires. No idea why. Maybe its a Holden thing lol?
    Last edited by Cringer; 4 Weeks Ago at 10:12 AM.
    A standard approach will give you standard results.

    My Tuning Software:

    VVE Assistant [update for v1.5]
    MAF Assistant
    EOIT Assistant

  3. #3
    i will leave it alone then. thank you sir.