Durango r/t 2016 5,7 with 6,4 cam and exhaust manifold - help with tune

[GlobalGarage]

Hi

I have a 2016 Dodge Durango with 5,7 hemi. It has:
-custom exhaust with h-pipe,
-CAI Volant,
-throttle body spacer AFE,
-6,4 cam from non mds challenger,
-Mopar Performance valve springs,
-6,4 SRT exhaust manifold.

Now I need to tune it and I'm looking for a person who can help me to do this. If anybody could guide me a little bit from where to start and what to change for start or share some tune file so I can compare it with mine and tune it step by step. I can add a file from my car but it totaly stock, only MDS off.

Thank you and regards
Peter

[MakurFab]

post your current tune. I get you going in the right direction. I have a similar build only its a 2016 rt with 6.4cam and manifolds custom 3" exhaust cat delete, Legmaker CAI, comp cam conical valve springs, 6.4 injectors, 3.09 LSD and fill BMR adjustable control arms all 4 corners and eibach sportline dampers and springs.

[GlobalGarage]

Hi

Thank's for answer. No problem, I can add my stock file. Maybe you could send your's that i can compare with mine?

Durango 5,7 stock.hpt

[MakurFab]

Not a problem at all. Obviously use my file as reference. Strangely enough there are many tables that are missing between the 2 files. Anything in gray on your file is missing on mine but if I have tables that you don't when your file is the main file. You won't be able to tell because there is no
indication on the main file.

[GlobalGarage]

Any news? You add a file maybe? becasue I don't see it.

[MakurFab]

Figured it out and I have attached my tune file as reference