^^^ That data log is useless.
^^^ That data log is useless.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
You don't have to save a log file. It it saved automatically upon stopping it, with a name based upon date/time.Originally Posted by [email protected]
becuase for us behind a tiny phone screen, trying to help you, a non running log/scan is useless for us to give any suggestions.Originally Posted by [email protected]
Something is wrogn with your O2s. a ground, shorted wire, pinned incorreclty, i dont know, but you need to figure that out before doing anything else.
On one of your logs the ltft was give 25% and stft 50%.. i didnt even know thats possible. You have a mechanical issue, a vacuum leak, bad O2s or wiring, exhaust leak, something is going on. That needs to get fixed first.
UPDATE: found b1s1 bad. replaced sensor, test drove. runs like shit but data look good to me. i have acquired a ticking noise from pas side head area sounds like a lifter tick. will upload log file
what happened at 3:06.265 That it started being all crazy with the charts all over the place?Originally Posted by [email protected]
Did you drive it?
was this just sitting and idle?
Did it go into close loop?