Gen 4 scanner pid question.

[Chevythang89]

My 2011 Silverado A6 E38 as well as my 2013 5th gen M6 1.le both show and log data for a ton of idle pids such as proportional, integral, trans, start up, base airflow, etc.
however, my 2013 5th gen Zl1 M6 E67 will not show or log any of these pids.
I've tried to clear all saved vehicle data, numerous times I've repolled for supported parameters, tried downloading mpvi drivers, as well as a number of different trial and errors. every time, the idle pids may show up, but the fade out when the scanner starts to log.
is this just absent pids for the E67, or am i missing a step i should do to log this info?
ive heard doing the 2bar OS would let it log that info, but i don't really wanna go that far and rework the tune just for scanner info.
thanks

[GHuggins]

It's quite possible that hpt just didn't add those in for that particular OS. Contact support and let them know what's going on, what's missing and what you're trying to get added into for you to log.