Or throw a wood gasification unit in the bed.
Or throw a wood gasification unit in the bed.
These guys are right on the 210 injector. I have personally done the complete characterization on them using my bench and wouldn't plan to use them on any of my projects. They have much of the same repeatability issues as the Deka80's, but at double the flow rate/error. Even with "good data", you will still struggle because the hardware is not consistent. I would strongly recommend rethinking your fuel requirements and getting a properly sized set of injectors that will make your life easier with tuning them.
But they idle great, except when they don't.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]