I am new to HP Tuners Have tried to find anything else related but no success. So a new post.

Truck is a 2023 Ram 5.7 limited with e-torque, Canada. I have the smart-access cable installed. I have tried both stable and beta versions of VCM editor, both have same results.
When you hit gather it does not list correct identify hardware.
I believe GEPC2A+ 20018+Dodge is the correct hardware so I have been trying that one.
When you click read it quickly goes through to the next stage. The truck dings and puts an SOS emergency call on the screen during the read.
HPeditor.png

The VCM editor then tells you to shut the truck off wait 10 seconds and turn back on and click OK.
This is when it fails with message
Reader Upload Request x7F Negative Response Code
HPeditor fail2.png


Harrop has the same year and e-torque truck that they have read.
I tried it with out the smart access cable and it will not start the read at all.
I tried a read from my sons 2015 Dodge and it completes no problem.

Out of ideas.

Need the Read file so I can order a unlocked PCM from HP tuners. Have a Harrop super charger kit waiting to install. Joy... but I need this read first