I know the LS2 table isn't setup in % like the LS1/6 was, my question is when I scan the LTFTs, do I subtract or add those values from the given increments still? (ex.1600 + (-5)) I am using the LTFT method to tune the part throttle VE.
the only reason I am doing it this way and not using a WB is b/c I don't have access to one at this point. I will at the dyno for the WOT stuff obviously. Should I just scrap this until I can get a WB into it and set aside a day to get the part throttle stuff done?
Thanks.