at least one with an E40 pcm so that I can verify PID's & adjust the charts/gauges to work properly
at least one with an E38 pcm so that I can verify PID's & adjust the charts/gauges to work properly
at least one with an E67 pcm so that I can verify PID's & adjust the charts/gauges to work properly
Basically Im going to try and get a couple of default configs for the LS2 folk...I think the two configs are a good starting point but I know the charts & gauges arent going to work properly, but I need to verify the PID's work in these applications so I can take another step forward in testing to get this done.
What I need is a short .hpl log file for both configs...by short I mean as short as 10 seconds is fine more than likely as I just need to verify & modify which is pretty simple.
If you have any input as to adding different PID's or what have you don't hesitate to speak up...this is all being done for YOU so we want to make sure its what YOU want!
Here are the two...you can just post the two hpl files using the manage attachments feature right in this thread. Just be sure to list your vehicles year/make/model & if you know the pcm thats even better, if you don't know which pcm its not a big deal so don't worry about it.
Thanks for your help
Bill