Hi Folks,
I did a DOD/AFM delete on a 2007 Gen IV 6.0L (L76) . I used the GM L96 6.0L VVT Cam, use w/ OEM Valve Springs (28-12626660)
Started Right up. Runs on every other cylinder...which is what I expected...till we tune this out.
Two questions, please.
1) If I purchase and HP Tuner, are there a set of "tunes" that are available for this particular engine with the new cam and will it actually fix the timing for the L96 cam in addition to removing AFM?
2) Since there is NO VLOM on the engine, should we install resistors to simulate the coils in the VLOM? Or just tape/seal off that connector?
Thanks for helping this newbie!