Hello, I have searched to no avail. Any help is appreciated.
It idles ok but when pushing the throttle it will get to right about 1600 rpm and it seems to hit a fuel cut or something. If you give it the gas it will go a little above, but still same thing. Doesn't matter if you ease it up to 1600 or get there quick, it cuts out untill RPM drops. It doesn't set any codes that I wouldn't expect.... I have no idea what is going on or what to look for.
I have tried messing with VE and timing in this area and it doesn't seem to change either....
84 Camaro (drag car) TH400
P59 ECU, 2004 6.0 LQ4, big cam, high rise manifold, etc
Converted to drive by cable (hopefully correctly- IAC works, TPS works, I am wondering if this is my problem somehow)
RTT OS
Disabled trans control/vats/etc
MAF disabled
Closed loop disabled
Log and tune attached. I know the tune is way off in many areas but trying to get some bugs worked out.
Tune 12.hpt
Log with cutout.hpl