I've been told that the wire that I want to tap into is the brown wire from the EGR. As far as I know, this is correct.
What I need to know is which wire coming from the WB do I run to the EGR?? The five wires are as follows from the WB:
Yellow, Red, Black
Grey and white.
Then the wires go through a connector and the colours don't match up on the other side????
Yellow becomes Blue
Red becomes White
Black becomes Pink
Grey becomes Orange
White becomes Black
The end of the harness that plugs into the control box has two labeled wires that say "ANALOG OUT-DO NOT APPLY VOLTAGE" They are Yellow and brown.
Hopefully one of you can tell me which wire is responsible for the 0-5v output,
As always, thanks for looking guys!!
Paul