Missing cold or time from start related spark tables in 3.6

[caniggia]

Hello

I noticed car from start is driving timing i have not seen in any table i have, takes around 30 sec to one min until it switch to timing is set in tables.
That causes some bogging in supercharger car when cold with low load and that low timing. Attached log from hot start and driving with constant speed and map, at around 1500 rpm, you can notice at one point it switched timing from 14-15 degrees to 25 degrees. Anybody experienced that?

04. from start table switching.hpl

[LilSick]

the tune is so far off and you have been beating on the thing so hard there is 15 deg of long term knock retard in it for starters : )

7.3.png

[caniggia]

the tune is so far off and you have been beating on the thing so hard there is 15 deg of long term knock retard in it for starters : )

7.3.png

That's fault of scanner, don't look at it, you don't want to look at 15 deg spark knock at idle

[LilSick]

i dont want to look at any of it lol

why is timing at the bottom of your big ass list???

SAE your only option???

you think its idling at 33.5 deg???

cuz my 18.5 would make more sense

what about the trims????

[HaasExp]

Anybody experienced that?

Yes, on every 3.6 I've tuned. There seems to be some Catalyst warm up timing tables that are missing in HP tuners.

[caniggia]

Yes, on every 3.6 I've tuned. There seems to be some Catalyst warm up timing tables that are missing in HP tuners.

Looks so, I reported it then to support

[caniggia]

i dont want to look at any of it lol

why is timing at the bottom of your big ass list???

SAE your only option???

you think its idling at 33.5 deg???

cuz my 18.5 would make more sense

what about the trims????

Not my tune, I don't care for now, I'm trying to figure problem from topic first