AEM 30-0334 to MPVI 3 connection issue

[onlytheclint]

Helpless new guy who has read endless threads and watched all videos I could find.

MED 17.1 2010 GTI. MPVI 3 connected bypass through the AEM OBD pass-though (nothing else connected to OBD.

Changed to all 7 channels on the AEM gauge, with no success in having it show up on the OBD controller list.

Please see the attached screen shot as a reference, let me know if additional data is necessary, I have no idea what is ok to share, and what's not.

For each of the 7 channels the ECM:7E8 and it's following information is unchanged, I believe that is to be expected.

Below where it says NONE:7EE, below is the read out for the 7 channels in the AEM gauge:

NONE:7EA
NONE:7EB
NONE:7EC
NONE:7ED
NONE:7EE (Channel 4, according to my reading, this was supposed to work)
NONE:7EF
TCM:7E9 (this was channel 1)

I repolled parameters after each change, checked the channel, and attempted to connect the gauge via OBD controller, not the external inputs. No luck.

I'm lost and need help, any insight would be greatly appreciated.

[onlytheclint]

Ticket 105694 opened.