HP-Friends,
Having an issue with a tune for E-85 Roush blower. Load keeps dropping around 5,800-6,100 on the Dyno. Car has stock 3.0 pulley, Belt, FIC 1000s and Arcane Deadhead return style fuel system. I have attached a VCM Scanner log. Anyone see any reason the load would drop. We do not believe its belt slip. This was first tuned for a 2.7 Pulley. With the Load drop we suspected Belt slip. As a test we installed the stock pulley and belt. Load drops at the same RPM. Can you take a look at the VCM log and see if anything stands out? Log with Stock Pulley attached.Stock Pulley E85.hpl

Many Thanks