Results 1 to 3 of 3

Thread: Problem with SD

  1. 02-08-2007 #1
    chev
    chev is offline
    Tuner in Training
    Join Date
    Jul 2006
    Location
    melb/australia
    Posts
    41

    Problem with SD

    Howdy all. I have a problem with 1barSD. When scanning the Grams/cyl only go to .40 at wot. Should go to .68-.72. Ok if I go back to factory OS? Any thoughts. Thanks Chev
    Reply With Quote Reply With Quote
  2. 02-08-2007 #2
    brh26
    brh26 is offline
    Tuner
    Join Date
    Aug 2004
    Location
    Qld Australia
    Posts
    166

    scanner issue

    Try reading this thread. http://www.hptuners.com/forum/showthread.php?t=10056
    I think you will have to remove the Maf airflow from the .cfg file to get the correct display.
    Reply With Quote Reply With Quote
  3. 02-08-2007 #3
    chev
    chev is offline
    Tuner in Training
    Join Date
    Jul 2006
    Location
    melb/australia
    Posts
    41
    Quote Originally Posted by brh26
    Try reading this thread. http://www.hptuners.com/forum/showthread.php?t=10056
    I think you will have to remove the Maf airflow from the .cfg file to get the correct display.
    Thanks brh26. Worked a treat
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »