p59 gen3 O2 need help turning off 02 for VE tuning

[bk2life]

trying this ancient 'linking' of my fuel psi pic on my server


https://ifitsgotwheels.com/pictures/...0/category/104

[bk2life]

For Injector data that you need to change.

Engine > Fuel > General > Flow Rate vs KPA
Engine > Fuel > General > Minimum Injector Pulse
Engine > Fuel > General > Default Injector Pulse
Engine > Fuel > General > Offset vs Volts vs VAC
Engine > Fuel > General > Short Pulse Limit
Engine > Fuel > General > Short Pulse Adder

This is the correct data, converted by me

@blindsquirrell, do you agree i need to change all of the above, bayond what you have done already? I'll be doing some more data logging this week, I'd like to get this nailed soon, LS fest is next month, and its a 4 hour drive there..
I can pay you for your help as well I never expect anything for free.
thankyou

[blindsquirrel]

Flow Rate vs KPA has been updated for the 12613412 L96 injectors.
Minimum Injector Pulse is 0.250ms in the L96, Gen 3 rounds this down to 0.243ms.
Default Injector Pulse is not used in the Gen 4, generally OK to leave what you have. I have not found a Gen 3 file that isn't 0.850-0.880 regardless of what injector or engine it is.
Offset vs Volts vs VAC has been updated for the 12613412 L96 injectors.
Short Pulse Limit is 4.000ms in the L96 file, if you think leaving yours at 3.921ms is going to be a problem you are more than welcome to change it. The Gen 3 won't accept a round 4.000, but hey.
Short Pulse Adder has been updated for the 12613412 L96 injectors.

[bk2life]

Flow.....

thank you for all of that