Originally Posted by
kevin87turbot
It could use some help in a few areas.
1. You should be able to idle it down to 725-750 range to help with the pushing.
2. The VVT tables would be better if you disabled the part throttle VVT, then enabled roughly 50% of its current commanded retard above 4200 rpm. Are you running a VVT limiter?
3. It looks like some VVE tuning has been done, but doesn't look like it's a completed product. You'd be better off in MAF only mode until you get it dialed in.
4. You can disable the Virtual Flex Fuel. It won't do anything but make it run worse.
5. You may have to desensitize misfire detection just a bit with that cam.