Hey all, im just finishing on getting all the parts for my tbss intake i want to put onto my gen 3 LM7, 50lb injectors and 92mm tb. Im a little new to tuning myself, can someone give me some pointers on how to tune the truck to the injectors and tb so i dont blow my shit up? TIA
But... does it actually have 58 PSI at the rail, measured with a mechanical gauge? Those Corvette filters are easily overwhelmed with larger than stock pumps, and pressure that can't get bled off back to the tank gets sent to the engine. Sometimes 80 or 90 PSI.
In other words, unknown fuel pressure. Because it hasn't been verified. But since The Internet says "Corvette filter = 58 PSI" there really shouldn't be any reason to check it, huh?
I havent had the intake/rails on because i dont know with it not being tuned to the bigger intake, bigger throttle body, and bigger injectors if it would mess anything up, it is my daily. i was just looking for help with a ballpark tune to get it to run without fucking anything up
Last edited by rhecwolfie; 01-23-2023 at 12:02 AM.