LNF - main torque tables - are these it and what does the second table do?

[carcar123]

For the LNF, after poking around and reading, it seems these are the two main torque tables.

1). Torque to Load - I believe this is the primary table (used to be Desired Air Load)...when you ask for 100% torque, say @3000 RPMs, according to this table, the ECU will try to achieve 216 lb/ft?

torque to load - stock.PNG

2). Optimum Engine Torque: I'm not sure what this one does in relation to the above table. "A representation of the optimum torque that could be achieved if fuel and spark efficiency were both 100%."

optimum engine torque - stock.PNG

[gtstorey]

Torque to load - The original DAL was probably a better description. The values are a "air load". Basically higher numbers try and allow more air into the engine. Don't get up caught up with units for a lot of the LNF tables since they often aren't really defined.

Optimum Engine Torque - https://forum.hptuners.com/showthrea...m-Torque-Table