Hey guys, looking for a little assistance on tuning my 5.3 mods are as follows:
Btr Stage 3
Beehive springs
Long tubes 3"
CAI
3200 stall
stock intake
stock injectors
stock heads
stock bottom end.
Nothing special just a basic little street build.
Truck currently has a baseline tune in it, it idles runs and drives fine. BUT when getting on throttle it falls on its face until it slowly kinda wakes up. I assume its super rich down low and way too lean up top. i dont dog the truck since it isnt correctly tuned so i kinda lay off of it. But i have gotten a log from a small short WOT pull and basic drive. I will post it below. I will also post its current full tune from VCM editor as well. The truck was built 2 years ago and wasnt driven but on occasion and im now finishing the appearance and interior so un wanting to make it my daily. Any and all help and tips are welcomed. Im new to this and just got my MPVI3 so cut me some slack on terminology. I have navigated the editor but the values just scare me and i dont want to adjust something wrong. So id rather just speak to the experts.