@mecanicman
[email protected]
I?ve been running his segment swap for almost 2 years without issue.
Type: Posts; User: madmann26
@mecanicman
[email protected]
I?ve been running his segment swap for almost 2 years without issue.
PM Sent.
Thanks 5FDP,
I am sending you a PM.
Thanks man.
So, what do I do? Find an OS for a 1500HD and do a write entire?
I looked at some last night and the electronic throttle tables are different, which, can brick the PCM.
Do I...
Hi guys,
I am doing a 80e swap next week and need some help with my segment swap. The OS ID is 12619623. This is a flex fuel OS that came stock on a 2006 Sierra.
I have found some previous...
If someone could help me out, I'd appreciate it.72988
I need some help fellas,
Long story short, my 17 month old RPM L7 trans spit its guts up. It broke the overrun hub and the rear drum splayed open and started cutting into my case. It did have a...
Part-throttle shift:
Normal, Performance, Cruise, Hot all need to be the same.
Full Throttle Shift Speed:
Needs to match the last table of each of the part-throttle shift tables from above...
I think I figured it out. Try this histogram and tell me what you think.
61410
So, just want to say thanks for the information sharing.
I'm in a similar boat. I've got my graphs setup and my AFR VE error graph works perfect.
I've also got my MAF error setup and it's only...
check your overspeed tables. this caused me some grief at one point.
Based on the values you have for the TCC, it should be locked 100% of the time.
I'm a recent recipient of a RPM L7 transmission and a Whipple.
With the transmission, what would be some recommended tuning options for the transmission. I have HPT now but I don't know if I...
sent you a pm
If your tuning it yourself,
You can add some timing to the area you're cruising in. you can also add +2 to the dwell table.
Outside of that, has it been tuned at all?
Holy mother of GOD!
This is awful. Just plain awful.
I tuned my truck myself but DAMN...mine is nowhere near this. HPT should revoke his accounts for this "tooning".
Your tuner is an idiot.
What fuel injectors are in this? Reason I ask is that the the flow rate vs KPA, looks, well, special. Let's start there.
I'd listen to jimmy.
BTW jimmy,
Thanks for the work you did with the spreadsheet and the 4l60's (from ls1tech). I used it to tweak my trucks FMC and pressure settings and holy jeebus, what a...
I pm'd you.
Where are you located?
A see a couple of things that stand out.
1. MAF has been failed - it's set to 0hz.
2. PCM is locked (best tell tell sign of a poor tuner, imo)
3. Your fans are set to...
You can get the EQ ratio yourself by using the formula: 14.68/xx.x (wanted AFR)= EQ ratio.
So this is at happening at WOT, right?
The answer lies in your EQ ratio that you are commanding in PE mode. I looked at your tune and you're commanding 11.7-11.5 AFR at WOT. If you want to...
Well,
PE is a flat, commanded value once either throttle area or KPA or both are reached.
As for the AFR itself, you make max torque with 11.9 and max HP with a 12.5. It's up to you really. I...
Start with changing 'enrichment ramp in' to 2.0.
This tells the PCM to go to PE mode much faster.
Hey all,
So, I am trying to use this with my tune and vehicle, 2006 Sierra, 5.3 (1bar os).
When I try to copy the RPM Boundaries map, it just flashes red on me. I've tried it on 2 different...