So for anyone who finds this and is also curious, the values in HP tuners for a E38 ecm are just endpoints of a line, so if you want a "thing" to happen at a value of "50", but you program 40 in one...
Type: Posts; User: Gordon-0
So for anyone who finds this and is also curious, the values in HP tuners for a E38 ecm are just endpoints of a line, so if you want a "thing" to happen at a value of "50", but you program 40 in one...
I've got the same issue with my 2012 Yukon 6.2 E38. Only fix I've found so far is to just adjust the override parameters from 240 or whatever it was stock down to 220. I may go down to 216 and call...
Thank you everyone that is helpful. The next thing I noticed when logging is that the coolant temp gauge shows 210 when the ECT value in VCM Scanner is much lower, like 185 for instance. Is there a...
so I realize the title is somewhat vague but for example, in the fan settings, 0->1 is at 44%, and 1->0 is at 40%.
does this mean that AT 44% the fans will go to state 1, or ABOVE 44% they will go...
02 wrangler, 4.0, 5-speed.
I have a non-stock transfer case which doesn't have any gears to change.
https://www.jbconversions.com/products/sye/np231j_short_sye.php
it finally worked for me using the beta software to write the tune.
reading the tune works fine in the regular software.
question: for timing, there are 3 tables, "main spark (egr off)", "main...
Issue is that I don't have any gears to change, I have a rubicon style electronic sending unit that reads off a pickup wheel with a fixed number of teeth.
Dakota Digital makes a converter box that...
I was able to tune a 2002 Jeep Wrangler 4.0 with a MPVI3 using the following method:
read tune with VCM editor
datalog with VCM scanner
write with VCM editor BETA
the standard VCM editor will...
did you ever figure this out? Seems like it should be possible
well hopefully I didn't just waste $50 on a credit for this, but I am having an issue writing a tune to my Jeep ECM, it gets past the radio warning, ign off, ign on, then when it gets to the point of...
I am actually using E85 at the moment, but I can still clean the MAF and see if that helps. when you say to edit the torque model are you talking about the virtual torque table?
So basically edit...
All,
Please forgive me if this is written somewhere, but I am new to tuning and I don't really know what exactly I am looking for.
I have a 2012 GMC Yukon with the 6.2 and a 6L80E.
After...
Hello all, looking to purchase an MPVI3 to tune my GM car but it would also be great if I could tune my 02 Jeep 4.0. I see that on the list of supported vehicles HPT is saying you can do it with the...