Thanks for reply.
Type: Posts; User: 1FastLS
Thanks for reply.
New to dodge tuning but, I'm messing with e85 from my understanding 2019 challenger is able to run e85 with out a sensor ounce you enable flex fuel patch and setup other tables, My question is in the...
Noticed your file you loaded x and y axis are changed from your factory setting could be causing issues.
channels work charts and times but after upgrade not getting data on graphs ? Tried adding to channels multiply times any help would be great i have attached lay out
Agreed gonna get everything switched over on wideband and setup in scanner today. I like to do things the hard way first :banghead:
working on getting arf error with double stoich setup tried several different math setups any one setup with newer hp version any help be great
attached my current config
when logging and save file. Under charts and time i can play run but how do i move the slider on my own ? thanks
Bump to top has any one come across this issue on a gen5 thanks
Trying to figure im loosing Map signal and injectors at 4600 to 5000 rpm only after putting larger exhaust on because it was restricting my boost , I was only at 14.3 after exhaust now at targeted 17...
PST have you done any conversion back from a 2 bar back to MAF on a gen 5 with out having the original, file ? Cause one of my thoughts was to just load in a 2010 file for car do vin swap, but...
question Whats best way or way to convert back a car 2010 Camaro gen 5, but not having the original, Cars file, From a 2 bar setup back to Maf ?
Second question the Beta software does it allow to...
question Whats best way or way to convert back a car 2010 Camaro gen 5, but not having the original, Cars file, From a 2 bar setup back to Maf ?
Second question the Beta software does it allow...
question on a 2010 camaro with automatic trans, can a stock file from another car be uploaded with out affecting the tcm until you do a vin rewrite ?
2008 Corvette customer had cam installed brought to have tuned, drove car 8 miles no shifting issues using paddles shifter drove easy to get here, did read entire file to get to put in baseline file...
Ok thanks Bill will do
guess you need to be attached thou i went threw the files and unlocked them all saved everytime then closed suite then open it back up and then the showed locked again i...
so just click on (tuner lock all ) and it should no longer lock files ?
But when i do that then i save the file and do it individually close the vcm suite go back in they are locked again ??
Well got a call from a guy i had done some work on their car tuning, he called and said his file was locked i have never locked any vcm files ever.
So i get laptop out and every file appears to be...
On a 2006 Corvette, for tuning can the standard release version be used or does it have to be the Beta version for Hp tuners, Thanks
Any one have a vcm scanner file setup for 3 bar logging their willing to send, for version 2.22 thanks shoot me a pm and i can give email
Yes that is what i typically do, but working with another tuner at a shop and here is my basic setup car is setup pretty much race
And what he says or has done is tuned VE and hit our afr Then...
Yes but you set your pe to desired afr then adjust ve they have the pe table at stoich across the board.... typically i set my afr target say 12.8 in pe then refine my ve and or maf depending on what...
ok this is a speed density tune, but my question is the
tune, the pe table is set almost lamba acoss the board and never have seen this way before are they dialing in the ve and making correction...
No not one of Butch's..the car is being build at a high end shop here in Nothern Va and they ordered the engine ecm wiring harness from a shop out west i believe, but cannt remember who they said it...
ok thanks will let my buddy know and let him work it out with the vendor
thanks
I believe the injectors are factory didnt look at numbers on them when you say the serial is corrupted you mean what ? the company said the reason they had to use the 09 silverado ecm was so they...