Search:

I recently tried to read my ?16 F450 and it had several ecm hardware profiles to choose from, which one do I use? I was able to ID and read the tcm fine, but wouldn?t ID the ecm. Thanks.

Edit:...

You would be correct. What else needs to be done?

Yes, but is there anything special I need to do to keep the engine running right, since the ecm will no longer be getting a trans signal?

I?m going to be putting a turbo 400 in my truck, and I need to know what needs to be done in the tune to be able to do this. The truck has a tcm, and under the general tab in the trans section,...

Is there a BE table in a 3.0 custom OS? I thought I read something about removing it in 2.25.

Could there be some enthanol in the fuel he's using? Just wondering why it's commanding 13.61 at idle and 11.6 at wot. The pe table shows that it should be commanding ~12.5 at wot.

Truck has a pretty healthy cam in it, I forget exact specs but somewhere in the 224/228, .58x/.58x, 112 range. Stock injectors as far as I know

Im tinkering with a friends pickup, a 2006 5.3 truck, and noticed something pretty odd today when we were logging a run. As engine speed increases, the commanded afr richens, but the pe table values...

I'm tuning on a late 2007 Silverado (e38 ecm) with a 4L80e swap. Is there a setting somewhere that would allow full transmission line pressure all the time? Been having issues with the tranny...

I've been tinkering with my tranny tune, and have been wondering about something for a while. On my upshift shift pressure tables, the allowable values are 0-148psi. However, on the Max Pressure...

Everything I've read says that stoich value for e85 is ~ 9.85:1. As far as scaling the tune, Im only pretty sure I did it right, not 100% sure. What timing correction and multipliers need attention...

Sorry, I left out a pretty crucial bit of info lol. The truck also has a Precision 7475 turbo on it, and is running on e85. The fuel system is that big because I ultimately plan on doing a boosted...

Alright guys, I'm just about at my wits end. Been messing with this truck for some time now and I can NOT get it to make a clean run without coughing and cutting power. Seems like its the traction...

Roger that. To be honest, shift feel is a moot point. I just want the tranny to be able to hold the power. Full line pressure all the time wouldn't bother me in the least.

Thank you sir. I have read that thread before. I was just unsure as to whether or not I needed to adjust the airmass coefficients, or if scaling the torque reference for shift pressure would suffice....

So how would a guy go about getting the newest beta? I've been wanting to experiment on the ol lady's 2014 ram hemi

Anyone? At least tell me what I'm doing wrong. I posted once before about this rig and never got a reply.

I have been trying to get my truck lined out for a while... Taken me a while since I am a new tuner and usually don't have much time to mess with the truck. I've finally gotten the engine tune close...

Can I read and tune a 2014 Ram 1500 hemi? The ol lady has one and I'm just curious before I buy the credits. Also, would it take 2 credits to read and tune, like GM? Or how many?

Anyone? A little more info on the truck: late 2007 4.8(ly2), tsp 220r cam, edelbrock Vic jr manifold with elbow, 160lb injectors, 15lb wastegate spring. And how do I scale for injectors that big? I...

Howdy.

Name's Mark, and I live out in the sticks. 75 miles west of Oklahoma City in a little town called Clinton. The closest person that tunes vehicles is at least an hour away, which is why I...

Clinton, Oklahoma.

I recently purchased VCM Suite Pro because I got tired of always having to drive an hour and a half to get anything tuned. Right now, I'm working on a 2007 chevy truck with the 4.8L engine and a...

Having this problem too. Serial number on the back of the interface doesn't work.

Hi all, my name's Mark. Wanting to start tuning my own vehicle. I have a question about the HP Tuners software. Looking at buying the VCM Suite Pro version, does this come with a USB to OBD2 cable?...