Had this happen twice. Once it trashed the TCM and the dealer could not re-flash. The other time I just left the battery disconnected for 48 hours and it came back. Good luck.
Type: Posts; User: Darin Morgan
Had this happen twice. Once it trashed the TCM and the dealer could not re-flash. The other time I just left the battery disconnected for 48 hours and it came back. Good luck.
I was still fighting the idle issue a bit even after getting the injectors somewhat dialed in. I finally " fixed" the issue by tuning it hybrid VE/MAF. Tune the VE up to 1500 and let the MAF take...
Your right, Its a huge pain in the ass but it helped a bunch!!! After 12 hours of playing with it I got it to idle stable. It hunts just a bit in gear but its livable. I will refuse to tune anything...
I have been using your transmission spread sheet since it came out with great results. This, this is awesome! Your a huge credit to our profession. I cant thank you enough. If you ever need cylinder...
Been messing with this for a couple days and I am exhausted. When you blip the the throttle the rpm goes up, comes down, seems to stabilize then it drops down to 450rpm and almost dies. I have played...
Did you ever get help on this? If not, I can help.
Email me at [email protected]
Do you personally feel that with cams such as a 232/245 113lsa that 21° is to much even if the MAF is close to the TB? With certain CAI I find that 21° is the only way to calm it down with high...
Yep, thats the problem. below is what I posted on another forum stating what we did to fit the other 2 clutches in the packs. The trans hits hard and firm now.
The stock clutch clearances are...
I have run into a problem that hopefully some one here has run into as well. I dyno’ed tuned an LS3 engine on a Superflow dyno using an E67-ECM and a GMPP crate engine wire harness. It was an older...
They Are called Alto red Eagle clutches but they may very well be produced by Raybestos.
Never asked for help on this board before but I really need it now!:banghead:
A friend and I recently purchased a complete rebuild kit with the Red Eagle double bonded clutches and Alto steals. I...
That was it! I copied a short cut to my desk top and it was looking the DLL and could not find it. This must be a stand alone program.
Thanks!
Followed the direction to a tee and everything works fine right up until I try to Generate Equations and then the program crashes. (see screen shot). I have tried to run the program as admin and with...
My Lenovo T-510 with Win7 Pro has been rock solid stable and a great tuning platform with exception of the touch pad. Its very temperamental. I have been working with the settings and have about 80%...
To anyone thinking this software is overwhelming at first my advice is to get on this forum and read Read, Read, Read, Read! I read every day on this subject and downloaded every PID, Histogram,...
HI everyone, my name is Darin Morgan,
I head up induction system R&D for Reher Morrison Racing Engines in Arlington Texas. My primary job is designing cylinder heads and over all induction systems...
Hi guy’s. Name’s Darin Morgan
My brother “Brad Morgan of Reher Morrison Racing Engines” and I have built every conceivable type and class of racing engine you can think of. I have been a...
Will this work
Mine was flaring something awful after a re-flash. I just increased line pressures 20psi and it eventually went away after about ten hard runs. I re-flashed about seven days after it went away and it...
You and me both . Contact support on beta issues.
I uploaded my new 2010 Camaro stock tune almost a week ago as well. Have not seen it show up.
Whats the deal?