I got this sorted in the end after a lot of searching. I moved the injection timing back a bit at idle - around 10 degrees. The idle is a lot cleaner now and much smoother. I now have constant...
Type: Posts; User: deano1712
I got this sorted in the end after a lot of searching. I moved the injection timing back a bit at idle - around 10 degrees. The idle is a lot cleaner now and much smoother. I now have constant...
I was thinking of trying this but first I need to sort out the leak on the header. If I tune open loop the tail pipe analyser is going to read lean, since its sucking in fresh air. Next step is to...
Thanks for that Russ. I have changed the setting and it made it a bit better but the engine is still running 5% rich at idle. It seems I have small leaks in the headers around the collectors. The car...
Check my logic then...
I couldn't see much info on narrowband voltages on the internet but the Innovate LC-1 setup indicates a standard sensor gives:
1.1v @ 14.08 AFR
0.1v @15.01 AFR
Is this...
Help! My car has just failed emissions test as part of its annual check (in UK) so its off the road while I get it fixed. Engine is a LS376/480 fitted to a BMW Z3. Its running in (pure) closed loop...
It would be good if this feature is made to work. I want to do some more logging and to carry the laptop around is a pain. Is HPT going to comment on this? 500hp and a laptop on the seat is hardly...
I was getting a similar amout of KR with my LS376/480, even with 100+ octain fuel. I have no obvious rattles but a header pipe running very close to one of the knock sensors. I increased the voltage...
Are you saying here that with Beta we cannot use WB input in any histogram?