Search:

Nice one Alvin, been at work all this set so not had chance to log the car, will try setup those maths and see what I can find! Like you say surely after all this time is would be showing more slip...

Ah ok, Brill cheers... I had seen that part in the tune area, but wasn't sure if it was safe to do that, least that will stop it coming on.

I've done some more logs and found I'm not getting any...

Yeah I'm pretty sure it's the converter that's showing up as slip, as when logging actual trans slip in gears 1-3 it's mostly reading 0 rpm.... This was a math parameter worked out with input/output...

Thanks for that buddy, will use that next time! I don't know if you remember but you were helping me last time when I was having an issue with 2nd and 4th, it ended up being a full rebuild again......

Other grab 134373

Hi mate, thanks for the reply....motor wise its a stock 5.7 LS1, it won't be seeing a track just a bit of back road enjoyment....I've just amended the tune with your suggestion and made all shift...

Hi all,

I'm after a little bit of help again with my tune, this is my 2nd time around with a rebuild and I don't want to break it any more...I wondered if anyone was free to have a glance at my...

Cheers dude, will try keep it a little lower next time and see how I get on, but I've now pulled the trans and tore into it and found the drum is screwed, warped, hot spotted and gouged, no beuno!...

When I first pulled the file I think it was at 6150rpm and I lowered it to 6k and not done many full 6k shifts but a few, Ive now lowered it to 5900 but obv the damage is already been done, I'm just...

I have recently installed a transcooler thinking about it but it's been driving with that for a few weeks, could possibly had an airlock as I've checked after install, and it took about 500ml.......

Thanks for getting back to me, was hoping I'd changed some settings that was causing it... Maybe that was wishful thinking. Have seen some mention about the 2nd and 4th apply pin being changed, it...

Anyone got any ideas? Thanks.

Hi everyone, I've recently swapped a 3.15 gear and 2800 stall and a transgo shift kit to my 2001 Vette....I've used the bluecat tool and other peoples experience for setting the trans up regarding...

Well slight bit of progress albeit slight, wrote the complete file today instead, and that's reset all the security thing, as now I'm getting the security flash and soon as ignition is on it goes off...

Thanks for posting all that mate, my only concern is I'm not getting a security light at all on the dash, that's why I was thinking this whole things strange... It always used to flash but I'm not...

This vats thing sounds mega complex, I never realised how in depth this could ever be, I really appreciate you taking the time to reply and help me out.

With regards to writing the no vats file,...

Just done another read of the car and its done exactly the same, reads its fine and says cleaning up once done, primes the fuel pump and clicks a few relays...i've attached the file and also a log a...

@blindsquiral - Battery voltage is around 12.6 ish vees, and I've just been out to test it now with the headlights on and when cranked to on position the cluster shuts down but the headlights stay...

Yeah, have tried disconnecting the neg for 30 mins, then both, then touching them together for about a minute.

Not sure why they recommended the beta version, did think it was strange just thought...

Yeah the check engine light stays lit at key on, and the scanner still connects.... I've wrote the no vats file also and yeah no fails, all say completed.

Anything I can view on live data to...

Hi all,

I'm at a loss at the moment and really in need of some expert help...I've raised support with HPT but have done the things they suggested but they're not sure whats happening either, just...