Any chance on support for this application? Failed to read when I tried but was able to get VCM Suite Info log
Type: Posts; User: BTLD_LS1
Any chance on support for this application? Failed to read when I tried but was able to get VCM Suite Info log
I will take a look at the tune vs. stock tonight or tomorrow and see if I can remember which tables allowed for this.
I just wanted to add I think the key it to get more RPM with less power so...
I just want to say that leaving in boost in my experience with an 09 Sky is pretty much useless. I was able to get the Sky I was tuning to make 5# on the line but it would just spin on 245 drag...
Bill Im gonna be trying to tune another one of these with the GMPP tune next week, could you send me the latest beta for use on this?
Email sent :hi:
I have attached a tune I have been working on for an 09 Saturn Sky Redline
The car is going to be going to the track on a 50/50 E85 blend tonight and just wanted to see if anyone noticed anything...
Thanks Bill fixed my issue!
WIll get log this weekend and email support. Thanks Bill
ever get a fix on this? Now having this error reading a Saturn Sky Redline I tuned back in July
Picked up a 2008 Tahoe Hybrid with the 6.0. Did a search and looks like these have yet to be supported. I saw at one point someone was offering to provide a PCM so this could be accomplished. Was...
I do have a dynojet wideband but its currently installed in the car. just looking for normal driving tune
Thanks flame, I guess I will just give that a try as no one else replied
Hey guys Im working on cleaning up the tune on my truck and I was searching and didnt find anything about tuning the VE tables on this (which is why they are the same they were in this thread from...
Thanks for pointing out the obvious I clearly overlooked :D I shoulda known that one thanks!
Working on an 02 Monte Carlo. Mods are K&N drop in filter, Taylor wires and 160* tstat.
Attached is the current tune for the car. No matter what I do the car continually throws a P0128 code and...
The wideband is in a weld-in bung that has been welded into the crossover in the x-pipe. There is the small possibility of a small exhaust leak, however, I would think that with the volume of exhaust...
I switched my car over to E85 at the beginning of the year. I was running SVO 42# injectors at the time and quickly saw that the duty cycle was over 100%. I purchased a set of 60# injectors from FIC...
Make sure you have a good ground, I had this issue when a chassis ground was left disconnected
I wouldnt say I'm experienced by any means, but Ill try to answer your questions....
1. Yes, I did fix the idle problem, I drilled the feed hole for the IAC out to about 3/8" and that resolved it....
I'm happy to say this works great and the truck pulls to 5900 without issue.
Thanks for the prompt response as always guys!
Hey Chris are these PCM's capable of using P codes P0301-P0308? or are these only available on vehicles with 1 coil per cylinder?
On some of the earlier GM V6 PCM's these are off from teh facotry...
For those of you that were interested in this I attached a log where I had my buddy command 1st in VCM scanner and I ran it up in first and u'll see at ~5666 it hits a wall and will not rev any...
Thanks for looking in to this Chris.
I'd appreciate it if you could PM me a link to the Beta or email it to me once you have added this in, [email protected].
Josh
I've tried in P/N I've also tried manually commanding 1st with VCM scanner and it hits the wall regardless
That was what I was afraid of, just trying to clarify if it works or not.
Yup just got my hands on it