Proper lash cap measurement and preload?
Type: Posts; User: hellbents-10
Proper lash cap measurement and preload?
Take a look at this one, it has been kicking my butt! No vacuum leaks, no more EGR. Small 220-222 cam nothing crazy as you see it pulls good vacuum. 146047146048
Checking in on this, how is the tune on these stock? Big PE delays and such like the older 3/4 ton trucks? Or are they pretty well dialed in like some of the newer 1/2 ton stuff?
1GCEK19V54E119868
Thanks for the help!
Yes
2004 Silverado 5.3
Anyone have a man trans file so I can segment swap this auto to man conversion. Thank you!
Does this mean we are closer to having Colorado/Canyon support too?
Does this one look to be supported in the near future?
Any tricks to stopping the ABS from kicking in and applying brakes?
Did the normal hold TC button down, put in track mode and cruised in 1st gear waiting for ABS lights to light up on the dash....
Any tricks to stopping the ABS from kicking in and applying brakes?
Did the normal hold TC button down, put in track mode and cruised in 1st gear waiting for ABS lights to light up on the dash....
Same here, with all those GM fullsize and now midsize trucks out there I am sure HPT could pull a good R.O.I.
Bringing this one back up with the new Colorado sharing this engine.
I ran into this today, always seemed to work just fine before with the Diablo unlocked controllers. Can I still use the stock PCM in the vehicle if I return it to stock with the Diablo, and then send...
Never had any troubles like this on the 14-18 v8 GM trucks. No matter what I do the blade will not stay open.
Did all of my normal adjustments with only moving torque values up as much as needed....
The problem is I need to keep the truck cal as it is in a 2008 silverado. So I need to keep everything functional in the stock truck. If this was a swap it would be easy.
127295127296
Here is my latest hail marry attempt with no luck.
It is odd sometimes I can fire it up and it will have no TM and run great. Shut it down and restart and right back into it trans...
Oh it is a reverse manual valve body and I have even matched the gear ratios to the gear selection with no luck.
Anyone get one to work like this or will it need a manual trans file?
I have torque management kicking in no matter what I do. I can start with stock TM settings all the way to having every...
General
Advanced Parameters Training is released. Some advanced parameters will be locked until
you complete the training. Once you complete the course, enter the code into the software
under HELP...
General
Advanced Parameters Training is released. Some advanced parameters will be locked until
you complete the training. Once you complete the course, enter the code into the software
under HELP...
I know some of these you needed to lower it in the FPCM module but I do not have one in this car. 1700 injectors in this one.
I know some of these you needed to lower it in the FPCM module but I do not have one in this car. 1700 injectors in this one.
Sorry wrong section mods can delete I put it in Gen 4.