Looking to get some advice or possible assistance with a small issue I'm having.
Recently swapped out my 3200 protorque for a 3600 circle d and now the car sometimes shuts off when putting it in...
Type: Posts; User: c_low29
Looking to get some advice or possible assistance with a small issue I'm having.
Recently swapped out my 3200 protorque for a 3600 circle d and now the car sometimes shuts off when putting it in...
I wanted to give GHuggins a big shout out for helping me out to understand HP Tuners and help me with various issues I was having. He continues to help me even though he has his shop and is...
ok so at dead idle having a 500mv difference is normal until i give it throttle.
Basically unless at WOT the b1s1 will be more than 500mv lower than b2s1 they are only close when at WOT but at idle they are very far apart.
...
Is it normal for the sensors mv to be that far apart at idle. I have attached a log for reference
...
I had the car tuned at my buddies shop in Maryland. I do have a AEM wideband but it doesnt connect to HP tuners.
Also what Bar Map should i be using from these directions
https://www.hptuners.com/help/vcm_editor_parameters_gm_os.htm
Is this a good place to start with taking the MAF off and what not. I have HP tuners but I dont have the wideband that connects to the computer only to the gauge on my dash.
...
I am going nuts trying to understand the whole VE thing, I guess i just dont understand the concept and where to start.
still getting 1.8 60 foot and a 12.2-12.3 1/4
heres the tune 5268652686
5268152682526835268452685So here is the update yall I havent had a chance to tune the VE's yet but i did make some more passes on a new transmission tune. The way im looking at the logs it looks like...
Good stuff thank you all for the help. I'm going to get to the track with the changes I made and take some more logs see how she runs and report back. Again thank you all very much it's hard to get...
I hate to sound dumb but I'm pretty new at this how would I go about dialing in the VE
I think i know what you mean for powerhop does that include the two tabs under it Via Spark and Via Fuel Cut?
How does it look now GHuggins?
One thing I did notice is the torque management from the engine has stock tables. Should that be turned off completely?
Good Evening All,
Looking for a little help with my tune
2011 Camaro SS Automatic
3200 Protorque Stall
3.91 Gears
1 7/8 Headers with Off road connections
Borla catback
Cold Air Intake
So I got it fixed it seems that the shortcut on my desktop for VCM Editor was a bad file. If I open the file directly from the folder in the C:/ drive all works as should
Ran as administrator still will not let me open file from File-Open
I will double check but there is only one account on this computer and it should be an administrator account.
Keith if you could hit me with a PM and maybe i can give you a call this afternoon...
Just yesterday I installed the VCM Suite and the drivers and when I first opened it, it did not ask me to enter a key or serial number. So I went ahead and entered them manually browsing through the...