Just do a TPS reset.
Unplug your TPS and IAC motor...then turn on ignition for 20sec (dont start the car) Turn ingniotion off plug in the TPS and IAC motor again.
Then check with your scanner with...
Type: Posts; User: Conman
Just do a TPS reset.
Unplug your TPS and IAC motor...then turn on ignition for 20sec (dont start the car) Turn ingniotion off plug in the TPS and IAC motor again.
Then check with your scanner with...
Looking at your scan you, it looks like your TPS is reading 2% which means the car is in run mode rather than in idle, hence idle parameters aren't coming into play, and the ECU thinks the car is...