I have the same issue, anyone know of a fix?
Type: Posts; User: Wilson34
I have the same issue, anyone know of a fix?
Hey guys,
I have a 1999 Camaro A4 that I am going to be adding a 4l80e transmission too along with hopefully flex fuel support. Can anyone point me in the right direction as far as upgrading my OS...
Have you checked/tried other injectors?
So I won't have to license a stock file from the repository, just change the VIN to mine then write entire into my Trans Am.
Thank you Bill.. So does anyone have unlimited year model license for 2001 Pontiac Firebird that could modify stock 2001 file to use my VIN number for me? I wouldn't mind giving someone some money...
I can't pass my readiness tests with my car. 2001 Trans Am, I go into the DTC's to set all to 3-No error reported, but it does not have a full listing of all the codes. It only goes from P0101 to...
6spd car. Ok these next few days I'm going to play with it a little and see what kind of results I can get.
I just don't want it messing with my AFR in certain regions were the car tended to buck...
Anyone alter their DFCO settings to bring in DFCO with the smaller amount of vacuum produced by the bigger cam. Stock the DFCO is set to come on with MAP<18. I'd like to change this to ~30-35Kpa..
...
Make sure all your histograms are ready before going to the dyno and have your laptop out and ready. Time is money so I come as ready as possible.
Make sure all of your fueling is correct before...
Actually there is a delay called enrichment rate. If this value was made really small, and coupled with the tailpipe wideband getting crap readings at low rpms could give you the delay you see.
Ahah! Yup, the HPtuners hook did not work but when copying to clipboard works.
Thnks
Hey guys, looking for some help.
I'm running the VE 3.5 version and when going to paste data from my VE AFR error histogram to the VE Table I run in to the error I attached an image of.
...
Could this brick my pcm?
Also I have 2 credits currently availble which I've set aside for the enhancements. The cable is already licensed to my 1999 FRC...
So, will I have to use 2 more...
Would this require me using credits to license that other file, then applying 2 more credits for the enhancement aswell.
Frost, I tried PM'ing you to keep from bumping this thread but your inbox...
here you go
Bill said there is no 3 bar enhancement availble for my VIN, how do I get another OS. Would I have to use credits to license another file that can have 3 Bar enhance and use credits for that and then...
Hey guys, I'm going to be running around 16-18psi on my car but I'm limited to a 2 bar enhanced OS.
What do you guys recommend I do, stick with 2 bar or scale IFR to expand the maf's range?
Oh I forgot to mention I have the LTFT disabled
Hey guys, I'm tuning my '08 Z with GM stage 3 came and have the Maf calibration pretty spot on. I'm running into an issue with the STFT adding as much as +10 during idle, bumping the AFR to around...
Sent email, noone ever replied.
Can someone help?
Hi, I'm trying to apply a single vehicle license to our 2000 4.3l s10 and when going to the license screen no options are availble except the no license select. I can't select single vehicle,...
Hi, I'm begging to tune our 2008 H/C z06, and I have the software setup for advanced view but it still isn't showing all the parameters. I pulled a stock file from the repository and it has all the...