Well I figured out my WB issue this week. It's a POS. It is 7 weeks old, cost +$250 and it's dead.
AEM 30-0334 X-series UEGO Wide Band.
I have contacted the seller (past return date), and AEM....
Type: Posts; User: SantafeNoob
Well I figured out my WB issue this week. It's a POS. It is 7 weeks old, cost +$250 and it's dead.
AEM 30-0334 X-series UEGO Wide Band.
I have contacted the seller (past return date), and AEM....
Thanks. Comparing the FT's I figured my EQ ratio table was off.
Where can I find the proper setup for a graph utilizing my Wideband.
Thank you
I have LT + ST [Math] as an average, showing percentage.
and
EQ Ratio #1 sensor as average, Lambda
As a first time "tuner", I'm just following tutorials.
Could some one please tell me what's going on here? I see these two graphs showing both rich and lean at the same time.
Am I wrong?
Thank you.
Thank you LSxPoweredSorento
I know this thread is a bit old, But hey so am I. I just tried it out, and it works beautifully.
I couldn't go the disable / WB method, just kept making her super...
Ok, so I changed my VVT Intake cam LOW, MED, HIGH tables to TSP's recommended.
I figured I need to start over with the MAF tune. Well that was a disaster. So I figured the VVE table was to far...
Ok, now that "68Formula" pointed out that my low cam table is stock. Will I be losing any power if I swap TSP table?
When this table is referenced the cam is Retarded correct? So that will have an...
You're right. How I didn't see that I don't know. I'll blame it on a long of setting block.
My only info TSP Stage 3 VVT Truck cam 216/220, .600"/.600", 112 LSA 106 ICL
Ok, I got the knock sensors back to 120, still no Knock or KR.
I received the recommended cam table from TSP. It seems odd to me that a VVT cam would have so little in the table.
The real...
Damn it, I went the wrong way. I must have had the wrong compare file open. I reset the tune and I'll flash it in the morning. I had dropped it to 170 previously.
I'll log the drive to work in the...
Thanks everybody
I don't think I've even seen the injector temp table.
Would someone look at these High Oct tables and tell me if I'm wrong. My table seems too different, I know that my Stage 3...
Yeah... Saturday morning after my second pot of coffee, I will take some time and see if I can understand that method. Right now it's beyond my HPT knowledge, and requires some learning time.
...
I'm back with WB and an issue (or 2). My MAF tune seemed to go well (of course, what do I know). So I jumped back to VVE tuning. It seems that my logs always leave the VVE table jagged. I smooth the...
Thank you 07GTS
My wideband came a day early, hopefully get it in before the weekend.
I was following Goat Rope Garages' tutorial (at least I thought I was) for tuning VVE without wideband....
Not exactly sure why, but when I re-enabled the sensors, I seem to have lost any gains the VVE tweaking gave me. Feels sluggish and won't
downshift into 2nd.
Ok, short & sweet
2010 5.3 LC9 Sierra CC FF. Had lifter tic, rebuilt engine with TSP stage 3 216/220 .600" VVT cam, LS7 lifters, dual springs, CAI, long tube's.
My "tuner" kind of road tuned...